Step 1, Dump the Original 4GB NAND

Step 2, Apply Flux to 4GB EMMC

Step 3, Heat up EMMC with Hot Air

Step 4, Remove EMMC

Step 5, Remove Top Resistors

Step 6, Flip board over to this location

Step 7, Remove Bottom Resistors

Step 8, Install New Resistors & Capacitors

Step 9, Install all Top Side Resistors, Capacitors & New 16MB NAND

Visuals of a V1 Corona 16MB from Factory

Sharky's Customs LLC

* Send In Service * 4GB Nand Downgrade to 16MB Replacement + RGH3 Install Send in Service

$40.00

DVD DRIVE: Nand Downgrade Only No RGH Install

Nand Downgrade Only No RGH Install Downgrade + RGH Install Service Downgrade + RGH Install + DVD DRIVE BOARD

Product variants

Quantity

This Repair Service is for your 4GB Corona. we will Remove the 4GB Nand and no longer needed resistors. and will add a 16MB Nand with the Needed Resistors. Included will be a RGH3 Install or 1.2 Install. This Service may not be Compatible with a Dual Nand or Triple Nand if Original Nand Dump cannot be Recovered.

SYPTOMS THIS WILL FIX:

No power, console won't format, settings may not change, profiles or wifi settings are still there after you deleted them.

What happens is the EMMC Fails causing these issues above.

CONS:
if the console has no power from a Failed Nand. i will not be able to dump the nand first Then i will not be able to save the DVD Drive board and Original KV and Other Files. This means after the service is completed, you will need an extra DVD Drive Board Replacement (LTU2) For your console to read disks again, this service would be required. if you don't care about your console being able to play games again VIA disk drive then you dont have to worry about this.